SALVISCOUNT PORT SHAFT GENERATOR REPAIR
BLUE MARLIN SHIP SEA - FASTENING REMOVAL Supplying manpower, tools, equipment and consumables to remove sea-fastening structures for the rig detailed as follow: To Remove and grind after cutting work 46 pcs of sea-fastenings (item 01-46) on DW: No.1115874-003-01. To Remove and grind after cutting work 19 pcs strong boxes (item 47-48) on DW No.1115874-003-01. [...]
M/V SHENG HO CRANK SHAFT TURNING GEAR REPAIR - Boarded vessel, discussion with Capt onboard and inspection - Trouble shoot the problem for the gear system - Repair the brake - Correct the brake position - Reassemble the system - Test the system in good working condition
TOURMALINE Vessel AIR CONDITIONAL SYSTEM REPAIR ON COMPRESSOR NO.2 - Take out the pipe, cut of the leaking elbow. - Renew elbow and install bracket for safety. - Install back the pipe. - Vacuum the system on compressor and condenser No2. - Charging Freon gas into the system, - Start-up compressor no.2. - Tested accordingly.
POSH SHEARWATER ESCAPE HATCH COVER MODIFY + Supply Spring of emergency escape hatch as per origin sample onboard. - Modify the hatch cover with scope of works as below: - Remove the hinges and the lock by cutting - Re-position the hinges and lock. -Install counter weight for escape hatch cover. Rewinding Motor. [...]
WESTSEA TITAN REFRIGERATION SYSTEM REPAIR Compressor No.1 - Release refrigeration gas out of systems - Overhaul exist freezer compressor by chemical liquid. - Fill up the oil - Renew oil separator by oxygen and acetylene - Install compressor into origin position - Renew suction valve, discharge valve by oxygen and acetylene - Testing all condenser [...]
PW NATUNA PROCEDURE FOR CHANGING 200T CRANE WIRE Lower the main hook near central and clean area on main deck. The sheaves’ axis aligned horizontal so wire run up and down freely. Disconnect the limit switch for runner drum ( mark the exact position of drum and turn on the drum to established position at [...]