-Lift up the flowmeter from Engine room to main deck.
– Arrange transportation to workshop for inspiron.
– Cleaning, disassemble the unit for checking,
– Re-assemble back after repair, ready for calibration.
– Send it back to vessel via PTSC Offshore services.
Accomodation Vessel
Chau Le2019-06-11T10:28:11+07:00PW NATUNA PROCEDURE FOR CHANGING 200T CRANE WIRE Lower the main hook near central and clean area on main deck. The sheaves’ axis aligned horizontal so wire run up and down freely. Disconnect the limit switch for runner drum ( mark the exact position of drum and turn on the drum to established position at [...]